Sizes (O. D. X W. T): From 13.7mm -- 323.9mm 2)Standard: DIN 1629 3)Steel Grade: St37.0, st44.0, st52.0, st55, ck45

DIN 1629 ST37.0 ST52.0 ST35.8 St44 carbon seamless steel pipes.


Standard: DIN 1629 ST37.0 ST52.0 ST35.8 St44
1. Seamless Circular Unalloyed Steel Tubes
2. Steel Grades: St37.0, St44.0,St52.0
Length :1/2"-48"  21.3mm-1219.2mm
Wall Thickness:
SCH10,SCH20,SCH30,SCH40,SCH60, SCH80,SCH100,SCH120,SCH140, SCH160
2.11m-59.54mm

DIN 1629 ST37.0 ST52.0 ST35.8 St44.0
Standard: DIN1629 Seamless Circular Unalloyed Steel Tubes

Scope: This standard applied to seamless circular tubes and pipes made of unalloyed steel as listed in below table. These tubes are prodominantly used in construction of chemical plant, vessels, pipework and for genearl mechanical engineering purpose. The maximum permissible working pressure and permissible working temperature are specified in below table.
Shape: The tubes shall be furnished in the following shapes, as specified by the purchaser: round, square,rectangular and special sections.


DIN 1629/4 ST35.8,ST35.4,ST45-4,ST52.4
 

din1629 chemical st37.0 st44.0 st52


steel pipe

carbon steel pipe

 Copyright (c)2012 LongtaidiIf you do not find the information you need, Click Here  Get Support

New Update Pipe List


    General knowledge of alloy steel pipe: introduction, chemical composition, heat treatment performance, melting equipment 1. Introduction to alloy steel pipe Alloy steel pipes have a hollow cross secti.
    JIS G3454 Carbon Steel Pipes for Pressure Service 1. Scope This Japanese Industrial Standard specifies the carbon steel pipes, hereinafter referred to as the pipes, used for pressure service at an app.
    At present, Chinas large-diameter seamless steel pipe, the main production process is hot-rolled large-diameter seamless steel pipe and heat-expanded seamless steel pipe, thermal expansion of seamless.
    American standard ASTM A234 WPB elbow The American standard ASTM A234 WPB corresponds to the national standard 20# carbon steel, and the pipe fittings made of the material have two kinds of seamless p.
    Q235B spiral steel pipe details: Q235B spiral steel pipe is made of steel coiled coil as raw material, which is often heated and extruded, and welded by automatic double-wire double-sided submerged ar.
    LARGE-DIAMETER PIPES/LINE PIPES The LONGTAIDI Group is one of the largest global suppliers of large-diameter pipes for oil- and gas pipelines. LONGTAIDI is focused on welded large-diameter steel pipes.
    Flanges are the parts that connect the shaft to the shaft and are used for the connection between the pipe ends. They are also used for flanges on the equipment inlet and outlet, for the connection bet.
    Standard: GB/T 18984-2003 Uses: Suitable for -45 ~ -100 C in low temperature pressure vessel pipelines and low temperature heat exchanger steel tubes. The main production steel grade: 09DG, 16MnDG Mec.
Contact Us Online To Serve You Better

Hot Click PRO


      General knowledge of alloy steel pipe: introduction, chemical composition, heat treatment performance, melting equipment 1. Introduction to alloy steel pipe Alloy steel pipes have a hollow cross secti.
      JIS G3454 Carbon Steel Pipes for Pressure Service 1. Scope This Japanese Industrial Standard specifies the carbon steel pipes, hereinafter referred to as the pipes, used for pressure service at an app.
      At present, Chinas large-diameter seamless steel pipe, the main production process is hot-rolled large-diameter seamless steel pipe and heat-expanded seamless steel pipe, thermal expansion of seamless.
      American standard ASTM A234 WPB elbow The American standard ASTM A234 WPB corresponds to the national standard 20# carbon steel, and the pipe fittings made of the material have two kinds of seamless p.
<