Specifications: diameter: 320 to 127 mm thickness: 0.4 to 12.7 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe

Astm A252 Piling Pipe,A252 spiral pipe,A 252 SSAW/ERW pipe


This specification covers nominal size from the wall steel tubing piles of cylindrical form and applies to pipe piles in which the steel cylinder works as a permanent load-carrying member. Alternatively, as a casing to kind cast-in-place concrete piles.
 
Independence Tube is now producing ERW Steel Pipe Piling to ASTM A252 in Marks 1, Grades two, Levels 3. Piling Pipe is made from 6.623" O.D. to 26" O.D. in walls from .198" to .772" up to 78 feet lengthy.
Astm A252 Piling Pipe,A252 spiral pipe,A 252 SSAW/ERW pipe

SPECIFICATION ASTM A 252

MIN MECHANICAL PROPERTIES

A252 STEEL GRADE

Tensile toughness ,min Ksi
( Mpa )
Yield power, min Ksi ( Mpa ) 
Elongation in two inches
(50mm)percent min

GR.1

50 ( 345 )

30 (205 )

30

GR.2

60 ( 414 )

35 ( 240 )

25

GR.3

66 ( 455 )

45 ( 310 )

20

SCOPE
 
This specification covers nominal thickness of your wall steel pipe piles of cylindrical shape and applies to pipe piles in which the steel cylinder acts as a permanent load-carrying membere Alternatively, as a shell to type cast-in-place concrete
 
By far the most well-known Pipe Piling sizes of 10.75" 12 and OD.75" OD are produced in our hebei province ,cangzhou city ,china.2 week production cycle for the quick desires.
 
The 14" and 16" OD piling sizes are produced in our SINDAPIPE.
When it comes to the versatility of designing with tube and pipe goods
 
 
STEEL CHEMICAL COMPOSITION
 
The metallic shall conform towards the following requirements as to chemical composition:
 
Seamless and welded pipe : Martin furnace, basic-o2 or electric furnace:
 
Phosphorus, maximum (%) : .050
 
MECHANICAL PROPERTIES
 
GRADE 1 Level two GRADE three
 
Deliver strength, min. psi (MPa) : 30,000 (205) 35,000 (240) 45,000 (310)
 
Tensil strength, minutes. psi (MPa): 50,000 (345) 60,000 (414) 66,000 (455)
 
Elongation in 2 in., min. Per cent : 30% 25Per cent 20%
 
PERMISSABLE VARIATIONS IN WEIGHTS AND DIMENSIONS
 
Weight
 
The weight of any period of pile shall not change greater than 15% above or 5% underneath the nominal thickness weight. Each and every length shall be weighed individually.
 
Thickness
 
The minimum walls thickness at any point shall not greater than 12.5% beneath the nominal wall size specified.
 
Diameter
 
The outdoors size of steel pipe stacks shall not vary a lot more than ±1% from the size specified.
 
Length
 
Length as specified having a tolerance of ±12.
 
, AND AppearanceFINISH and WORKMANSHIP
 
The completed pipe piles will be reasonably straight and shall not contain imperfections in these number or of such persona as to render the tubing unsuitable for pipe stacks.
 
Surface imperfections, the range of which doesn't exceed 25% in the nominal wall surface thickness, shall be permitted. This can be explored by grinding or filing to establish the depth.
 
Surface imperfections, the depth of which exceeds 25% of the nominal walls thickness shall be thought of flaws. By welding might be permitted when the degree of defect does not exceed 33 , Repair of problems? % from the nominal walls thickness. Ahead of welding the defect shall be absolutely taken away.
 
CERTIFICATION
 
Upon request in the purchaser, within the contract or order, a manufacturer’s recognition that the material was tested and manufactured in accordance with this requirements with each other with a report of the chemical substance and tensile tests shall be furnished.
 
MARKING
 
Each and every time period of pipe pile shall be legibly marked by stenciling, stamping, or rolling to show : the name of your manufacturer; heating quantity; the type of pipe; the length, excess weight and size and walls thickness; and the specification number as well as the grade.

上一篇:P110 Electric-welded casing,Q125 ERW casing pipe

下一篇:API 5L GR.B SMLS IN STOCK PIPES 48.3mm~168.3mm SCH 40

 Copyright ©2012 New SindaIf you do not find the information you need, Click Here  Get Support

New Update Pipe List

    API 5CT N80 P110 114.3mm pipe for oil field
    API 5CT N80 P110 114.3mm petroleum casing pipe.

    OCTG Casing Tubing
    OCTG Casing Tubing,Seamless API 5CT casing pipe / tubing / coupling Standard: API 5CT Size: 1.05''-----4-1/2'' Material: H40, J55, K55, N80, L80, P110 etc. Pipe end: EU, NU Length Range: R1, R2, R3 Application: For transportation.

    HEBEI NEWSINDA SEAMLESS STEEL PIPES
    NEWSINDA SEAMLESS STEEL PIPES Products:Boiler and Heat Exchanger TubesPressure Tubes and Line PipeMechanical TubesAutomotive TubesHollows for redraw.

    ASTM A53/ASME SA53 Seamless steel pipe
    ASTM A53/ASME SA53(GR.A/GR.B/GR.C) pipe include:, Black steel pipe,Welded steel pipe, Seamless steel pipe Common: ASTM A53/ASME SA53 Can quickly deliver diverse grades of steel pipes, like A53 Grade.A, A53 Grade.B and other people. Short Introduction ASTM.
Contact Us Online To Serve You Better

Hot Click PRO

    JIS STK steel pipe G3444 G3445
    JIS G3444 STK steel pipe,2.Size:13.7-812mm 3.Material:JIS G3444 STK400/490/500/540/290 .JIS STK steel pipe G3444 G3445. Longitudinal Welded Pipe
    Longitudinal Welded Pipe,Welded steel pipe is steel plate with the bending deformation of round, square and other shapes and then welded into the surface of the pipe joints. Welded steel pipe used is steel or steel billets. We supply of weld. steel pipe mechanical properties
    steel pipe mechanical properties Is to ensure that the steel pipe end-use properties (mechanical properties), an important indicator, it depends on the chemical composition and heat treatment of steel pipe system. Steel pipe standards, depen. gas pipelines,Dynamic simulation tools for multiphase oil an
    API5L Oil/gas Pipeline/Spiral Welded Steel Pipe OD: 219.1 mm - 3048mm for conveying water,drainage,coal gas etc.