Specifications: diameter: 320 to 127 mm thickness: 0.4 to 12.7 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe

ASTM/ ASME A106/SA106 High Temperature Seamless Carbon Steel Pipe


A106 Comparative Specifications
ASTM Specification A106 covers seamless carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging and similar forming operations. NPS 1-1/2 and under may be either hot finished or cold drawn. NPS 2 and larger shall be hot finished unless otherwise specified. Surface finish standards are outlined in the specification.ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. 

supply of A106 / SA 106 pipe and stocks a full range of grades B/C in a size rage of NPS 1/8″ to NPS 48″, with nominal (average) wall thickness as given in ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification*.  Pipe ordered under this specification shall be suitable for bending, for flanging, for welding, and for similar forming operations. A full range of A106 stock is available in Schedules 10 through 160, STD, XS, XXS. Unscheduled wall thicknesses available up to 4 inches.
Testing Requirements for seamless A106 carbon steel pipe
  • Hydrostatic Testing: Inspection test pressures produce a stress in the pipe wall equal to 60% of specified minimum yield strength (SMYS) at room temperature. Maximum pressures are not to exceed 2,500 psi for NPS 3 and under, and 2,800 psi for the larger sizes. Pressure is maintained for no less than 5 seconds.
  • Mechanical Tests:
      Degree of Bend   Diameter of Mandrel
    For normal A106 uses    90  12x nominal diameter of pipe
    For close coiling 180  8x nominal diameter of pipe
    • Tensile Test: Either transverse or longitudinal are acceptable for NPS 8 and larger
    • Tensile tests smaller than NPS 8: Longitudinal testing only
    • Flattening Test: NPS 2 and larger
    • Bending Test (cold): NPS 2 and under

 Grades B/C

 Sizes

NPS 1/8″ to NPS 48”
Wall thickness: Schedules 10 through 160, STD, XS, XXS.

Lengths of A106 seamless carbon steel pipe
Lengths of  A106 seamless carbon steel pipe must be specified on order. No “jointers” are permitted unless otherwise specified. If no definite lengths are required, the following practice applies:
Single random – 16’ – 22’ (5% may be 12’ – 16’)
Double random – Minimum length is 22’. Minimum average is 35’ (5% may be between 16’ – 22’)
Marking Requirements 
Rolled, die stamped, or paint stenciled (manufacturer’s option).
Manufacturer’s name, brand, or trademark
A106 A, A106 B, or A106 C
Hydrostatic test pressure and/or NDE, or NH if neither is specified
Size, length, weight per foot (NPS 4 and larger)
ANSI schedule number or weight class or wall thickness
Additional “S” if tested supplementary requirements

 

上一篇: API 5L X52 PSL1, PSL2 steel pipe

下一篇:没有了

 Copyright (c)2012 LongtaidiIf you do not find the information you need, Click Here  Get Support

New Update Pipe List

    Water line pipe
    Water line pipe Size:4" to 60" carbon steel seamless pipeline, piplines,ERW line pipes,Spiral pipes.SSAW COATING PIPE LINE : [ Spiral Submerged Arc Welding (SAWH) steel pipeline].

    API 5l A53 ERW Pipe
    API 5l A53 ERW Pipe,ERW steel pipe JCEO Wall thickness:0.5mm-25 ISO,TUV,AD,PED cert. GB/T3091-2001 Material include Q235 20# 16Mn(Q345,Q215) .

    API 5L Line Pipes X42
    API 5L Line Pipes X42,API 5L: A25, A, B, X42, X46, X52, X56, X60, X65, X70, X80 API 5CT: J55 K 55 M65 N80 L 80 C 90 T 95 P110 H40 Q125 CS-90 SCS-95 SCS-80 TCS-110T .

    Hot rolled seamless steel pipe production
    Hot rolled seamless steel pipe production.
Contact Us Online To Serve You Better

Hot Click PRO