Specifications: diameter: 320 to 127 mm thickness: 0.4 to 12.7 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe

ASTM A252 STEEL PIPE Test Specimens and Test Methods


Check Specimens and Check Solutions
eighteen.1 The strain check specimens and exam procedures shall be in
accordance with Examination Solutions and Definitions A 370, especially
Annex A2.
18.2 In the choice in the producer, the stress test
specimens shall be longitudinal or transverse strip test specimens,
by using a gage length of two in. (fifty mm) or eight in. (two hundred mm),
taken with the pipe or maybe the skelp. In just their gage duration,
longitudinal strip examination specimens shall be nominally eleven?2 in. (38
mm) wide, non-flattened, and with parallel sides.
18.three For welded pipe piles, the strain examination specimens shall
be taken as follows:
eighteen.3.1 For longitudinal-seam pipe piles, any longitudinal
strip examination specimens shall be taken through the pipe parallel into the
pipe axis and 90° in the weld, or through the skelp at a
corresponding spot and orientation, and any transverse
strip test specimens shall be taken through the pipe 90° to your pipe
axis and 180° through the weld, or from your skelp at a corresponding
site and orientation.
18.3.2 For helical-seam pipe piles, any longitudinal strip
examination specimens shall be taken from the pipe parallel on the pipe
axis and at these types of a site the middle of the specimen is
situated at least a quarter with the length between adjacent weld
convolutions, or with the skelp at a corresponding locale and
orientation; and transverse specimens shall be taken from the
pipe 90° on the pipe axis and at these a area which the middle
of the specimen is situated around half the space
among adjacent weld convolutions, or with the skelp at a
corresponding locale and orientation.
18.four Specimens shall be analyzed at home temperature.

上一篇: decisive parameter for the selection of API 5L steel pipeline for service in a hydrogen environment.

下一篇:seamless carbon steel pipe meet global industrial need

 Copyright ©2012 New SindaIf you do not find the information you need, Click Here  Get Support

New Update Pipe List

    ASTM A53/ASME SA53 Seamless steel pipe
    ASTM A53/ASME SA53(GR.A/GR.B/GR.C) pipe include:, Black steel pipe,Welded steel pipe, Seamless steel pipe Common: ASTM A53/ASME SA53 Can quickly deliver diverse grades of steel pipes, like A53 Grade.A, A53 Grade.B and other people. Short Introduction ASTM.

    API 5CT N80 P110 114.3mm pipe for oil field
    API 5CT N80 P110 114.3mm petroleum casing pipe.

    HEBEI NEWSINDA SEAMLESS STEEL PIPES
    NEWSINDA SEAMLESS STEEL PIPES Products:Boiler and Heat Exchanger TubesPressure Tubes and Line PipeMechanical TubesAutomotive TubesHollows for redraw.

    OCTG Casing Tubing
    OCTG Casing Tubing,Seamless API 5CT casing pipe / tubing / coupling Standard: API 5CT Size: 1.05''-----4-1/2'' Material: H40, J55, K55, N80, L80, P110 etc. Pipe end: EU, NU Length Range: R1, R2, R3 Application: For transportation.
Contact Us Online To Serve You Better

Hot Click PRO

    Longitudinal Welded Pipe
    Longitudinal Welded Pipe,Welded steel pipe is steel plate with the bending deformation of round, square and other shapes and then welded into the surface of the pipe joints. Welded steel pipe used is steel or steel billets. We supply of weld. gas pipelines,Dynamic simulation tools for multiphase oil an
    API5L Oil/gas Pipeline/Spiral Welded Steel Pipe OD: 219.1 mm - 3048mm for conveying water,drainage,coal gas etc. steel pipe mechanical properties
    steel pipe mechanical properties Is to ensure that the steel pipe end-use properties (mechanical properties), an important indicator, it depends on the chemical composition and heat treatment of steel pipe system. Steel pipe standards, depen. JIS STK steel pipe G3444 G3445
    JIS G3444 STK steel pipe,2.Size:13.7-812mm 3.Material:JIS G3444 STK400/490/500/540/290 .JIS STK steel pipe G3444 G3445.