Specifications: diameter: 320 to 127 mm thickness: 0.4 to 12.7 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe

Transmission fluid seamless steel pipe


Transmission fluid with seamless steel pipe 

 

  seamless steel pipe

1:Out Dimesions:2"-14"

2:Thickness:SCH20-SCH160

3:Standard:API 5L,API 5CT,DIN 1629/2448,DIN17175,ASTM A53,ASTM A106B,ASTM A179,ASTM A210,ASTM A335,ASTM A519,GB 5310-1995,GB 3087-1999 and so on

4:Surface Treatment:painting or according to customers' requirements

5:Length:5M-12M

6:Advantage:High quality,can be manufactured by customer requirement

 

 

Transmission fluid seamless steel pipe

 

seamless steel pipe


Packing & Delivery Details:

1:Packing Detail:Export standard packing or according to customers' requirements

2:Delivery Detail: Within 10-20 days after the receipt of T/T or L/C 

 

 

 

(A) sizes are shown in Table 6-22.
 
(2) allow deviation are shown in Table 6-23.
(3) mechanical properties are shown in Table 6-24.
(4) Use for conveying fluids generally seamless.
Table 6-22 transmission fluid with seamless steel pipe sizes

 

Name
Data
Diameter and wall thickness
Shall comply with GB/T17395 "seamless" requirement
Length
A hot-rolled (extrusion, expansion) tube for 3-12m
2 cold drawn (rolled) steel pipe 3_10.5m
Bending
A wall thickness ≤ 15mm is not greater than 1.5mm / m
(2) wall thickness> 15mm when not more than 2.0mm / m
3 is not greater than the outer diameter ≥ 351mm 3.Omm / m

 

Table 6-23 tolerance of diameter and wall thickness (mm)

 

Type of pipe
Pipe size
Tolerance
Ordinary Level
High-level
Rolled (extrusion, expansion) tube
Diameter D
Entire
± l% (min ± 0.50)
 
Wall thickness S
Entire
Small +0.45 +15%
-12.5%            ​​-0.40
 
Cold drawn (rolled) pipe
Diameter D
6-10
± O.20
± 0.15
> 10 to 30
± O.40
± O.20
> 30 to 50
± O.45
Guests O.30
 
 
 
> 50
± l%
± O.8%
Wall thickness s
≤ l
± 0.15
± 0.12
> L ~ 3
+15%
A 10%
+12.5%
A 10%
> 3
+12.5%
A 10%
± lO%

 

Note: The diameter of not less than 35lmm thermal expansion pipe, wall thickness tolerance of ± 18%.
Table 6-24 longitudinal mechanical properties of steel

 

Trademark
Tensile strength ób / Mpa
Yield point ós / MPa
Elongation δ5 (%)
S ≤ 16
S> 16
10
335 ~ 475
205
195
24
20
410 to 550
245
235
20
Q295
430 ~ 610
295
285
22
Q345
490 to 665
325
315
2l

 

Note: 1. Steel grades and chemical composition shall conform to the provisions of GB/T699 or GB/T1591.
   2 pipe hydraulic test should be carried out by the root, the maximum pressure does not exceed 19MPa.

上一篇:Cold reduction of tube,Seamless Pipe cold-reducing

下一篇:Steel Pipe Rehabilitation Coating Steel Pipeline,Anti-corros

 Copyright (c)2012 LongtaidiIf you do not find the information you need, Click Here  Get Support

New Update Pipe List

    ERW tube,Spiral welded pipe, galvanized pipe, seamless pipe
    ERW tube,Spiral welded pipe, galvanized pipe, seamless pipe,To spec API 5L, API 5CT, ASTM A53, ASTM A252, EN10217, EN10219, BS1387 etc.

    Prime carbon steel pipe
    Prime carbon steel pipe 3.Grade/Material: API 5L , ASTM A106 B ,ASTM A53 B, 4.Outside Diameter(OD): 1/2--24'' IN. 5.Wall Thickness(WT): SCH5--SCHXXS..

    pipeline standard parameters
    The parameters of the standard implementation of the line pipe,Application status of oil and gas transmission pipeline steel standard pipe technical standards from the development side and the scope of the division can be divided into intern.

    seamless steel pipe Price Schedule,Spiral Pipe Price
    seamless steel pipe Price Schedule,Spiral Pipe Price,1 seamless steel pipe 3 hot rolled,cold drawn process 4 grade:A53/A106/API 5L Gr.B.
Contact Us Online To Serve You Better

Hot Click PRO